KPG 20kW

  • KPG 20kW generator set with Kubota engine on skid

Output
20kW

Voltage
240 1-phase: 73.2 A
208 3-phase: 61.0 A
480 3-phase: 26.5 A

Fuel consumption
1.80 gph @ full load

Fuel type
#2 diesel or #1 ULSD

Details

Powered by a Kubota diesel engine, this durable generator set produces 20.0 kilowatts of prime power output. The engine and generator are directly coupled and mounted on a rugged steel skid. All components are suitable for prime or intermittent usage. The entire set is thoroughly load tested prior to shipment. UL approved construction.

Standard engine

  • Kubota diesel model V2203-M-BG, in-line, four-cylinder engine
  • Electronic speed governing provides isochronous speed regulation, no load to full load
  • EPA "Interim tier 4"
  • Liquid cooled with industrial grade radiator and belt-driven blower fan

Controls & accessories

  • Key start panel with oil pressure, coolant temperature, hour meter, and glow plug indicator
  • Manual safety shutdow override, fuse protection
  • Safety shutdowns, energized-to-run, for low oil pressure/high coolant temperature
  • Four anti-vibration mounts between generator set and base frame
  • Electric fuel transfer and priming pump (12 VDC)
  • Battery cables for 12 VDC starting system

Videos

Specifications

Engine technical information

Manufacturer

Kubota

Model V2203-M-BG
Cylinders 4
Bore x Stroke 3.43 x 3.64 in
Displacement 2197cc (134 cu in)
Comp. ratio 22:1

Engine weight

430 lb dry

Fuel system

Fuel type

#2 Diesel or #1 ULSD

Injection pump Bosch PFR
Nozzle type Throttle type
Transfer pump Electric, 12 VDC
Fuel lift 1 meter (3.3 ft)
Suction fitting 1/4" Male NPT
Return fitting 1/4" Male NPT

Specific fuel consumption

1.80 gph @ full load

0.92 gph @ half load

(Actual fuel consumption varies with site conditions and fuel energy content.)

Lube oil system

Grade

API classification CF or other approved.

(See owner's manual)

Capacity 2.0 US gal

Filter

Full flow, spin on

Air intake system

Filter

Replaceable element

Combustion air 55.7 cfm

Total system restriction

20" H20

DC Electrical system
Starter 12V, 2.0 kW
Alternator 12V, 40 Amp
Glow plugs location Combustion chambers

Battery required

12V 650 CCA equiv, min

Run solenoid

12V Energize to run

Ancillary equipment

Mounting

Steel base with mounting holes

Isolators

Four composite mounts

Generator technical information
Manufacturer Mecc Alte
Model ECO 32 (standard)
Construction Four pole, brushless, open drip-proof (IP23), single bearing
Excitation Dedicated auxilliary winding
Cooling air flow 251 cfm
Leads 12
60 Hz voltages (continuous)

240 1-phase: 73.2 Amps

208 3-phase: 61.0 Amps

480 3-phase: 26.5 Amps

Power factor

Single phase ratings @ 1.0 PF

Three phase ratings @ 0.8 PF

Voltage reg. DSR digital type +/- 1% NL -> FL
Temperature rise 105C rise prime
Tel. interference THF <2%

Winding pitch

Two thirds

Control system

Self-excited

Cooling system
Radiator Finned tube type
Material Copper core, soldered tanks
Pressure 12.9 psi max
Fan type Blower, nylon
Water pump Gear case mounted
Type Centrifugal, belt drive
Thermostat Wax pellet type

Recommended coolant

50/50

Use low silicate ethylene glycol and high quality water. Consult manufacturer for details.

Cooling air required

1502 cfm

Exhaust system
Muffler type Industrial grade

Mounting

Vertical with up outlet

Restriction

1.5 in Hg max

Weight & dimensions
Please contact salesperson for weight and dimensions.

Accessories

Coming soon...